WF282A Digital Pressure Sensor Series

WF282A digitale druksensor

Op voorraad

The WF282a is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption. The WF282 is both a pressure and a temperature sensor. The pressure sensor element is based on a capacitive sensing principle which guarantees a high precision during temperature changes. The small package makes the WF282 ideal for mobile applications and wearable devices.

Gegevensblad: WF282A digitale druksensor

Gerelateerde bronnen

The WF282‘s internal signal processor converts the output from the pressure and temperature sensor elements to 24-bit results. Each pressure sensor has been calibrated individually and contains calibration coefficients. The coefficients are used in the application to convert the measurement results to true pressure and temperature values.
The WF282 has a FIFO that can store the latest 32 measurements. By using the FIFO, the host processor can remain in a sleep mode for a longer period of time between readouts. This can reduce the overall system power consumption.
Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface.

Key Attributes
Pressure Range:	30Kpa~1.2bar LGA-8(2x2.5) Pressure Sensors, Transducers - Industrial RoHS
Absolute Pressure Accuracy error:	±0.4% FS
Temperature Compensation:	20 ℃ ~ +65 ℃
Waterproof Rating:	IP67
Response Rate:	5ms
Over Pressure:	5 times
Pressure Media is Non-Corrosive Gases Only
ROHS-compatibel en halogeenvrij