WF4525D Digital Pressure Sensor Series

WF4525D Digital Differential Pressure Sensor

No Stock

WF4525 is an absolute, gauge or differential pressure sensor of ultra-high resolution with digital (1.8-3,6V), SPI or I2C interface. The output is fully calibrated, and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. The sensor is ready to be installed directly to the end system without further processing with medical, HVAC, industrial, commercial & automotive applications. The total error including repeatability, hysteresis, non-linearity, thermal offset and calibration error between 0°C and 60°C is better than 0.25% FS.

Datasheet: WF4525D Digital Pressure Sensor

Related Resources

Total error better than 0.25% FS over 0–60°C — covers repeatability, hysteresis, non-linearity, thermal offset, and calibration error in a single specification
Factory-calibrated, ready for direct installation — calibration coefficients stored in embedded memory; no post-assembly processing or customer calibration required
Flexible interface and pressure type options — digital , SPI, and I²C outputs available; absolute, gauge, and differential configurations to suit a wide range of system architectures
24-bit pressure and temperature output — high-resolution digital output for applications requiring precise measurement data
Configurable power modes — supports low-power operation for energy-conscious system designs

Key Attributes
Pressure Range:	1mbar~ 10mbar Pressure Sensors, Transducers - Industrial RoHS
Absolute Pressure Accuracy error:	±0.4% FS
Relative accuracy:	±0.03hPa
Temperature accuracy:	± 1.0°C
Temperature Compensation:	-40 ℃ ~ +125 ℃
Waterproof Rating:	IP65
Хуткасць адказу:	3~5ms
OverPressure:	3X Damage pressure
Асаблівасці:	Integrated ADC and digital interface;Standby mode;On-chip calibration and non-volatile storage;On-chip temperature output
Pressure Media is Non-Corrosive Gases Only
Rohs, якія адпавядаюць і без галагена