Sensore di pressione differenziale digitale WF4525D

Sensore di pressione differenziale digitale WF4525D

No Stock

WF4525 is an absolute, gauge or differential pressure sensor of ultra-high resolution with digital (1.8-3,6V), SPI or I2C interface. The output is fully calibrated, and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. The sensor is ready to be installed directly to the end system without further processing with medical, HVAC, industrial, commercial & automotive applications. The total error including repeatability, hysteresis, non-linearity, thermal offset and calibration error between 0°C and 60°C is better than 0.25% FS.

Scheda dati: WF4525D Digital Pressure Sensor

Conforme alla direttiva RoHS

Risorse correlate

  • Total error better than 0.25% FS over 0–60°C — covers repeatability, hysteresis, non-linearity, thermal offset, and calibration error in a single specification
  • Factory-calibrated, ready for direct installation — calibration coefficients stored in embedded memory; no post-assembly processing or customer calibration required
  • Flexible interface and pressure type options — digital , SPI, and I²C outputs available; absolute, gauge, and differential configurations to suit a wide range of system architectures
  • 24-bit pressure and temperature output — high-resolution digital output for applications requiring precise measurement data
  • Configurable power modes — supports low-power operation for energy-conscious system designs
Attributi chiave
Intervallo di pressione:1mbar~ 10mbar Pressure Sensors, Transducers - Industrial RoHS
Absolute Pressure Accuracy error:±0.4% FS
Relative accuracy:±0,03 hPa
Temperature accuracy:± 1.0°C
Compensazione della temperatura:-40 ℃ ~ +125 ℃
Valutazione impermeabile:IP65
Tasso di risposta:3~5ms
Sovrapressione:3X Pressione dei danni
Caratteristiche:Integrated ADC and digital interface;Standby mode;On-chip calibration and non-volatile storage;On-chip temperature output
I mezzi di pressione sono solo gas non corrosivi
Conforme alla direttiva RoHS e privo di alogeni
TipoDettagli
RoHSREACH e RHOS
ECCN
CNHTS9026201090
USHTS9026204000
TARIC9026208000
CAHTS9026200090
BRHTS90262010
INHT90262000
MXHTS9026.20.99

Applicazioni

Industria degli elettrodomestici
AMPIE APPLICAZIONI DI SENSORI IN MEDICINA & SALUTE-1
AMPIE APPLICAZIONI DI SENSORI IN MEDICINA & SALUTE-2
SENSORI DI PRESSIONE AMPIE APPLICAZIONI NELL'ELETTRONICA AUTOMOBILISTICA
SENSORI DI PRESSIONE AMPIE APPLICAZIONI IN INDUSTRIALE & Automazione-1
SENSORI DI PRESSIONE AMPIE APPLICAZIONI IN INDUSTRIALE & Automazione-2

Informazioni aggiuntive

TipoDettagli
Minimo1
Molteplici1
Imballaggio standard50
Unità di venditaPezzo

Calcolo della pressione

0 kPa = 0 MPA

Conversione di unità
0
Scorri fino all'inizio

Contattaci