WF153A Analog Type Gauge Pressure Sensor
Tersedia
WF153A is a analog voltage output pessure sensor,The device consists of a MEMS pressure sensor die mounted on a 3.6x 3.8 mm PCB protected by a metal cap. The WF153A can be delivered in a highly-linear version giving a linear output voltage directly proportional to the applied pressure.
Lembar Data: WF153A Analog Pressure Sensor
Sumber Daya Terkait
- Plug-and-forget signal —analog voltage output, one ADC pin and you’re done. No I²C drama.
- Near-perfect linearity —straight-line pressure-to-voltage curve means zero-fuss calibration in firmware.
- Tiny footprint (3.6×3.8mm)—fits where your competitors’ sensors don’t.
- Metal cap protection —MEMS die is shielded from assembly mishaps and environmental abuse. Better yield downstream.
| Atribut Utama | |
|---|---|
| Rentang Tekanan: | 0Kpa~40kPa LGA-8(3.6x3.8) Pressure Sensors, Transducers - Industrial RoHS |
| Linearitas: | ±0.3%FS |
| Kompensasi Suhu: | None |
| Zero Point Output Temperature Coefficient | 0.5%FS/℃ |
| Peringkat Tahan Air: | IP65 |
| Tingkat Respon: | 5ms |
| Tekanan Berlebih: | 2X Damage pressure |
| Tekanan Meledak: | 4X FS |
| Fitur: | Measure the force per unit area and convert it into an electrical signal |
| Media Tekanan Hanya Gas Non-Korosif | |
| Sesuai RoHS dan bebas halogen | |
| Jenis | Detail |
|---|---|
| RoHS | JANGKAUAN dan RHOS |
| ECCN | |
| CNHTS | 9026201090 |
| USHTS | 9026204000 |
| TARIK | 9026208000 |
| CAHTS | 9026200090 |
| BRHTS | 90262010 |
| INHTS | 90262000 |
| MXHTS | 9026.20.99 |
Aplikasi
Industri Elektronik Mobil
Industri Peralatan Rumah
Industri Medis dan Kesehatan
Industri Elektronik Konsumen
Industri Pemantau dan Pengendalian Industri
Informasi Tambahan
| Jenis | Detail |
|---|---|
| Minimum | 1 |
| Banyak | 1 |
| Kemasan Standar | 5000 |
| Satuan Penjualan | Bagian |
Perhitungan Tekanan
0 kPa = 0 MPa
Konversi Satuan
0
