WF153A Analog Type Gauge Pressure Sensor
Na lageru
WF153A is a analog voltage output pessure sensor,The device consists of a MEMS pressure sensor die mounted on a 3.6x 3.8 mm PCB protected by a metal cap. The WF153A can be delivered in a highly-linear version giving a linear output voltage directly proportional to the applied pressure.
Podatkovna tablica: WF153A Analog Pressure Sensor
Povezani resursi
- Plug-and-forget signal —analog voltage output, one ADC pin and you’re done. No I²C drama.
- Near-perfect linearity —straight-line pressure-to-voltage curve means zero-fuss calibration in firmware.
- Tiny footprint (3.6×3.8mm)—fits where your competitors’ sensors don’t.
- Metal cap protection —MEMS die is shielded from assembly mishaps and environmental abuse. Better yield downstream.
| Ključni atributi | |
|---|---|
| Raspon tlaka: | 0Kpa~40kPa LGA-8(3.6x3.8) Pressure Sensors, Transducers - Industrial RoHS |
| Linearity: | ±0,3%FS |
| Temperaturna kompenzacija: | Nijedan |
| Koeficijent izlazne temperature nulte točke | 0.5%FS/℃ |
| Ocjena vodootpornosti: | IP65 |
| Stopa odgovora: | 5ms |
| Pretlak: | 2X Damage pressure |
| Burst Pressure: | 4X FS |
| Značajke: | Izmjerite silu po jedinici površine i pretvorite je u električni signal |
| Tlačni mediji su samo nekorozivni plinovi | |
| ROHS kompatibilan i bez halogena | |
| Tip | pojedinosti |
|---|---|
| RoHS | REACH i RHOS |
| ECCN | |
| CNHTS | 9026201090 |
| USHTS | 9026204000 |
| TARIĆ | 9026208000 |
| CAHTS | 9026200090 |
| BRHTS | 90262010 |
| INHTS | 90262000 |
| MXHTS | 9026.20.99 |
Prijave
Automobilska elektronička industrija
Industrija kućnih aparata
Medicinska i zdravstvena industrija
Industrija potrošačke elektronike
Industrijski nadzor i upravljanje Industrija
Dodatne informacije
| Tip | pojedinosti |
|---|---|
| Minimum | 1 |
| Višestruki | 1 |
| Standardno pakiranje | 5000 |
| Prodajna jedinica | Komad |
Izračun tlaka
0 kPa = 0 MPa
Pretvorba jedinica
0
