WF153A Analog Type Gauge Pressure Sensor
Loaʻa
WF153A is a analog voltage output pessure sensor,The device consists of a MEMS pressure sensor die mounted on a 3.6x 3.8 mm PCB protected by a metal cap. The WF153A can be delivered in a highly-linear version giving a linear output voltage directly proportional to the applied pressure.
Pepa ʻikepili: WF153A Analog Pressure Sensor
Nā kumuwaiwai pili
- Plug-and-forget signal —analog voltage output, one ADC pin and you’re done. No I²C drama.
- Near-perfect linearity —straight-line pressure-to-voltage curve means zero-fuss calibration in firmware.
- Tiny footprint (3.6×3.8mm)—fits where your competitors’ sensors don’t.
- Metal cap protection —MEMS die is shielded from assembly mishaps and environmental abuse. Better yield downstream.
| Nā mea nui | |
|---|---|
| Laulā kaomi: | 0Kpa~40kPa LGA-8(3.6x3.8) Pressure Sensors, Transducers - Industrial RoHS |
| Linearity: | ±0.3%FS |
| Pākuʻi Mahana: | None |
| Zero Point Output Temperature Coefficient | 0.5%FS/℃ |
| Ka helu pale wai: | IP65 |
| Laki pane: | 5ms |
| ʻO ke kaumaha: | 2X Damage pressure |
| Pumi Poha: | 4X FS |
| Nā hiʻohiʻona: | Measure the force per unit area and convert it into an electrical signal |
| ʻO ka Media Pressure nā kinoea non-corrosive wale nō | |
| Hoʻopili ʻo RoHS a me ka halogen ʻole | |
| ʻAno | Nā kikoʻī |
|---|---|
| RoHS | REACH a me RHOS |
| ECCN | |
| CNHTS | 9026201090 |
| USHTS | 9026204000 |
| TARIC | 9026208000 |
| CAHTS | 9026200090 |
| BRHTS | 90262010 |
| INHTS | 90262000 |
| MXHTS | 9026.20.99 |
Noi
ʻOihana Kaʻa uila
Home home kahakaha
ʻOihana Lapaʻau a me ke Ola
ʻOihana hoʻohana uila
ʻOihana Mākaʻikaʻi a me ka ʻoihana hoʻomalu
ʻIke hou aku
| ʻAno | Nā kikoʻī |
|---|---|
| liʻiliʻi | 1 |
| lehulehu | 1 |
| Packaging maʻamau | 5000 |
| Hui Kūʻai | ʻāpana |
Ka helu kaomi
0 KPA = 0 MPa
Hoʻololi Unit
0
