WF162L Analog Pressure Sensor Series

WF162L Analog Type Absolute Pressure Sensor

En stock

WF162L-11Bar is a MEMS piezoresistive pressure sensor built on a silicon-silicon bonded structure, using an N-type substrate with P-type piezoresistors configured as a Wheatstone full bridge. Under standard operating supply voltage, the sensor delivers a millivolt-level output voltage with good linearity relative to the applied pressure, offering high sensitivity and good repeatability.

Fiche de données: WF162A Analog Pressure Sensor

Ressources connexes

Silicon-silicon bonded Wheatstone full-bridge structure — established sensing architecture offering good linearity, high sensitivity, and reliable repeatability
Linear mV output proportional to applied pressure — clean, predictable signal output simplifies downstream conditioning and calibration in the host system
Surface-mount LGA package — PCB with metal cap construction supports standard SMT assembly processes, reducing integration effort for customer board designs
Cost-effective uncompensated design — no onboard temperature calibration keeps the bill of materials lean, suited for systems with existing signal processing and compensation capability

Attributs clés
Plage de pression :	0Kpa~1.1Mpa LGA-8(3.6x3.8) Pressure Sensors, Transducers - Industrial RoHS
Non-linear:	±1%FS
Compensation de température :	Aucun
Coefficient de température de sortie du point zéro	00,5 %FS/℃
Indice d'étanchéité :	IP65
Taux de réponse :	5 ms
Surpression :	2X Damage pressure
Caractéristiques:	Mesurez la force par unité de surface et convertissez-la en signal électrique
Les médias sous pression sont uniquement des gaz non corrosifs
Conforme RoHS et sans halogène