WF153A Analog Type Gauge Pressure Sensor
재고 있음
WF153A is a analog voltage output pessure sensor,The device consists of a MEMS pressure sensor die mounted on a 3.6x 3.8 mm PCB protected by a metal cap. The WF153A can be delivered in a highly-linear version giving a linear output voltage directly proportional to the applied pressure.
관련 자료
- Plug-and-forget signal —analog voltage output, one ADC pin and you’re done. No I²C drama.
- Near-perfect linearity —straight-line pressure-to-voltage curve means zero-fuss calibration in firmware.
- Tiny footprint (3.6×3.8mm)—fits where your competitors’ sensors don’t.
- Metal cap protection —MEMS die is shielded from assembly mishaps and environmental abuse. Better yield downstream.
| Key Attributes | |
|---|---|
| 압력 범위: | 0Kpa~40kPa LGA-8(3.6x3.8) Pressure Sensors, Transducers - Industrial RoHS |
| 선형성: | ±0.3%FS |
| 온도 보상: | None |
| Zero Point Output Temperature Coefficient | 0.5%FS/℃ |
| Waterproof Rating: | IP65 |
| 응답률: | 5ms |
| OverPressure: | 2X Damage pressure |
| 파열 압력: | 4X FS |
| 특징: | Measure the force per unit area and convert it into an electrical signal |
| Pressure Media is Non-Corrosive Gases Only | |
| RoHS 준수 및 할로겐 프리 | |
| 유형 | 세부 |
|---|---|
| RoHS 규제 | 리치와 로즈 |
| ECCN | |
| CNHTS | 9026201090 |
| USHTS | 9026204000 |
| 타릭 | 9026208000 |
| CAHTS | 9026200090 |
| BRHTS | 90262010 |
| INHTS | 90262000 |
| MXHTS | 9026.20.99 |
응용
자동차 전자산업
가정 기기 산업
의료 및 건강 산업
소비자 전자 산업
산업용 모니터 및 제어 산업
추가 정보
| 유형 | 세부 |
|---|---|
| 최저한의 | 1 |
| 다수의 | 1 |
| 표준 포장 | 5000 |
| 판매 단위 | 조각 |
압력 계산
0 kPa = 0 MPa
단위 변환
0